SCHNEIDER ELECTRIC | MC-4/11/03/400 | Servo Drive

Product Introduction

The Schneider Electric MC-4/11/03/400 is an industrial servo drive associated with the ELAU motion-control product range. It is designed for servo motor control in automated machinery requiring accurate speed regulation, positioning, and coordinated motion.

This unit may be used in equipment such as packaging machines and other automated production systems, subject to the original system design. Before replacement or commissioning, verify the exact nameplate details, motor compatibility, feedback interface, electrical supply, and control connections.

Product Parameters Datasheet

Parameter	Details
Brand	Schneider Electric / ELAU
Model	MC-4/11/03/400
Series	MC-4
Product Name	Servo Drive
Product Type	Industrial motion-control drive
Rated Current	Confirm from the manufacturer’s documentation and nameplate
Supply Voltage	Confirm from the exact unit nameplate
Control Interface	Depends on the installed configuration
Motor Compatibility	Requires verification against the drive and motor specifications
Place of Manufacture	Not confirmed; check the nameplate
Product Status	Confirm whether new, used, or refurbished
Dimensions	Not confirmed
Weight	Not confirmed
Country of Origin	Check the nameplate
Discontinued	Current production and service status require confirmation

Product Features and Applications

The MC-4/11/03/400 is a single-axis servo drive in the ELAU PacDrive MC-4 family. It integrates the power stage and motion-control electronics in a compact unit for industrial automation systems.

Its principal specifications include 3 A RMS rated output current, up to 7.5 A RMS peak current for one second, a three-phase 380–480 V AC mains supply, and a 24 V DC control supply. The drive communicates with compatible PacDrive controllers through a SERCOS fiber-optic interface. <Cite refs={["turn290877search12","turn290877search3"]}/>

Typical applications include packaging machinery, material handling, labeling equipment, and synchronized motion systems. Actual compatibility depends on the installed controller, motor, encoder, hardware revision, and machine configuration.

Related Models

ELAU MC-4/11/03/400 — 3 A single-axis servo drive.
ELAU MC-4/11/10/400 — Higher-current MC-4 servo drive variant.
ELAU MC-4/11/22/400 — Higher-current MC-4 servo drive variant.
ELAU PacDrive C200 — Motion controller used in compatible PacDrive systems.
ELAU PacDrive C400 — Motion controller for multi-axis automation.
ELAU PacDrive C600 — Controller for supported PacDrive applications.
ELAU SM series — Servo motor family; verify motor and feedback compatibility.
ELAU SH series — Servo motor family used in compatible motion systems.

These are related products, not guaranteed direct replacements. Confirm the exact part number and system requirements before ordering.

Frequently Asked Questions

Q1: What is the rated output current?

The MC-4/11/03/400 is rated at 3 A RMS, with a peak current of 7.5 A RMS for one second.

Q2: What power supply does it require?

The documented mains input is three-phase 380–480 V AC at 48–62 Hz, plus a 24 V DC control supply. Always verify the unit's nameplate and applicable manual before installation.

Q3: How does the drive communicate with the controller?

The MC-4 family uses a SERCOS fiber-optic interface for motion-control communication.

Q4: Can it replace another servo drive?

Only after confirming the current rating, supply voltage, motor and encoder compatibility, firmware or hardware revision, and communication interface.

Q5: What should be checked before purchasing?

Check the complete model number, nameplate, physical condition, connector condition, and any available test results. For a used unit, confirm whether it has been tested under operating conditions.

topplcdcs邮箱.jpg